ZyXEL Communications NBG4604 - Tutorials; Chapter 6 Tutorials; Configure Wireless Security Using WPS on both Your NBG4604 and Wireless Client; How to Connect to the Internet from an AP

NBG4604 User’s Guide
63
CHAPTER 6
Tutorials
6.1 Overview
This chapter provides tutorials for your NBG4604 as follows:
• How to Connect to the Internet from an AP
• Configure Wireless Security Using WPS on both your NBG4604 and Wireless
Client
• Enable and Configure Wireless Security without WPS on your NBG4604
• Bandwidth Management for your Network
6.2 How to Connect to the Internet from an AP
This section gives you an example of how to set up an access point (AP) and
wireless client (a notebook, B in this example) for wireless communication. B can
access the Internet through the AP wirelessly.
Figure 29 Wireless AP Connection to the Internet
6.2.1 Configure Wireless Security Using WPS on both your
NBG4604 and Wireless Client
This section gives you an example of how to set up wireless network using WPS.
This example uses the NBG4604 as the AP and NWD210N as the wireless client
which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB
adapter or PCI card).