ZyXEL Communications NBG4604 - Your IP Address

Chapter 4 Connection Wizard
NBG4604 User’s Guide
48
The following table describes the fields in this screen
4.4.4 Your IP Address
The following wizard screen allows you to assign a fixed IP address or give the
NBG4604 an automatically assigned IP address depending on your ISP.
Figure 20 Wizard Step 3: Your IP Address
Table 13 Wizard Step 3: PPTP Connection
LABEL DESCRIPTION
ISP Parameters for Internet Access
Connection Type Select PPTP from the drop-down list box. To configure a PPTP client,
you must configure the User Name and Password fields for a PPP
connection and the PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
PPTP Configuration
Server IP
Address
Type the IP address of the PPTP server.
Connection ID/
Name
Enter the connection ID or connection name in this field. It must follow
the "c:id" and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your ISP.
Get
automatically
from ISP
Select this radio button if your ISP did not assign you a fixed IP
address.
Use fixed IP
address
Select this radio button, provided by your ISP to give the NBG4604 a
fixed, unique IP address.
My IP
Address
Type the (static) IP address assigned to you by your ISP.
My IP Subnet
Mask
Type the subnet mask assigned to you by your ISP (if given).
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.