ZyXEL Communications NBG4604 - Navigation Panel

Chapter 3 The Web Configurator
NBG4604 User’s Guide
33
3.6.1 Navigation Panel
Use the sub-menus on the navigation panel to configure NBG4604 features.
The following table describes the sub-menus.
- Bandwidth
Management
This shows whether bandwidth management is active or not.
- UPnP This shows whether UPnP is active or not.
Interface Status
Interface This displays the NBG4604 port types. The port types are: WAN, LAN and
WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up
(line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
Summary
DHCP Table Use this screen to view current DHCP client information.
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN Station Status Use this screen to view the wireless stations that are currently associated
to the NBG4604.
Table 3 Web Configurator Status Screen (Router Mode) (continued)
LABEL DESCRIPTION
Table 4 Screens Summary
LINK TAB FUNCTION
Status This screen shows the NBG4604’s general device, system
and interface status information. Use this screen to
access the wizard, and summary statistics tables.
Network