ZyXEL Communications NBG4604 - Configuring Bandwidth Management by Custom Application

Chapter 6 Tutorials
NBG4604 User’s Guide
71
In the following screen, you set the priorities for VoIP and e-mail.
Figure 38 Tutorial: Priority Queue
Click Enable for the VoIP (SIP) service and set priority to High. Do the same for
E-mail. For the rest of the applications, click Enable if you need these services
and set the priority to Low.
Note: You can also leave the Enable field blank for the rest of the applications. In
doing so, the NBG4604 does not apply bandwidth management to these
services.
6.3.2 Configuring Bandwidth Management by Custom
Application
Aside from the VOIP and e-mail services, you need to set the priority for MSN
Messenger. To do this, add the service in the Priority Queue table of the
Management > Bandwidth MGMT > Advanced screen.
Figure 39 Tutorial: Adding MSN Messenger to Priority Queue