NBG4604 User’s Guide
201
CHAPTER 24
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• NBG4604 Access and Login
• Internet Access
• Resetting the NBG4604 to Its Factory Defaults
• Wireless Router/AP Troubleshooting
24.1 Power, Hardware Connections, and LEDs
The NBG4604 does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the NBG4604.
2 Make sure the power adaptor or cord is connected to the NBG4604 and plugged in
to an appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the NBG4604.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.5 on
page 22.
2 Check the hardware connections. See the Quick Start Guide.
To Next Page
Loading...
