ZyXEL Communications NBG4604 - Summary: DHCP Table

Chapter 3 The Web Configurator
NBG4604 User’s Guide
35
3.6.2 Summary: DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG4604’s LAN as a DHCP server or disable it. When configured as a
Static
Route
IP Static
Route
Use this screen to configure IP static routes.
Bandwidth
MGMT
General Use this screen to configure a bandwidth management
service type.
Advanced Use this screen to configure bandwidth management for
specific types of applications.
Remote
MGMT
WWW Use this screen to configure through which interface(s)
and from which IP address(es) users can use HTTP to
manage the NBG4604.
Telnet Use this screen to configure through which interface(s)
and from which IP address(es) users can use Telnet to
manage the NBG4604.
FTP Use this screen to configure through which interface(s)
and from which IP address(es) users can use FTP to
access the NBG4604
SNMP Use this screen to configure through which interface(s)
and from which IP address(es) users can access the
SNMP agent on the NBG4604.
ACS Use this screen configure ACS and upload security
certificates to the device.
UPnP General Use this screen to enable UPnP on the NBG4604.
Maintenance
System General Use this screen to view and change administrative
settings such as system and domain names, password
and inactivity timer.
Time Setting Use this screen to change your NBG4604’s time and
date.
Logs View Log Use this screen to view the logs for the categories that
you selected.
Log Settings Use this screen to activate syslog logging as well as the
syslog server IP address.
Tools Firmware Use this screen to upload firmware to your NBG4604.
Configuration Use this screen to backup and restore the configuration
or reset the factory defaults to your NBG4604.
Restart This screen allows you to reboot the NBG4604 without
turning the power off.
Sys OP
Mode
General This screen allows you to select whether your device acts
as a Router or a Access Point.
Language This screen allows you to select the language you prefer.
Table 4 Screens Summary
LINK TAB FUNCTION