Chapter 6 Tutorials
NBG4604 User’s Guide
65
The following figure shows you an example to set up wireless network and security
by pressing a button on both NBG4604 and wireless client (the NWD210N in this
example).
Figure 30 Example WPS Process: PBC Method
6.2.1.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG4604’s
configuration interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and
select the PIN method to get a PIN number.
2 Enter the PIN number to the PIN field in the Network > Wireless LAN > WPS
Station screen on the NBG4604.
3 Click the Start buttons (or button next to the PIN field) on both the wireless client
utility screen and the NBG4604’s WPS Station screen within two minutes.
The NBG4604 authenticates the wireless client and sends the proper configuration
settings to the wireless client. This may take up to two minutes. Then the wireless
client is able to communicate with the NBG4604 securely.
Wireless Client
NBG4604
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
To Next Page
Loading...
