Chapter 20 Logs
NBG4604 User’s Guide
187
20.5 Log Settings Screen
Use this screen to send copies of the NBG4604 syslog files to a dedicated syslog
server. For information on setting up a syslog server, consult the documentation
that came with your syslog server product.
Click Maintenance > Logs > Log Settings to open this screen.
Figure 110 Maintenance > Logs > Log Settings
The following table describes the labels in this screen.
Table 70 Maintenance > Logs > Log Settings
LABEL DESCRIPTION
Active Select this to enable syslog logging on this device.
Syslog Server IP
Address
Enter the IP address of the syslog server to receive syslogs from this
device.
Apply Click Apply to save the setting to the NBG4604.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
