ZyXEL Communications NBG4604 - Navigation Panel

Chapter 5 AP Mode
NBG4604 User’s Guide
58
5.3.1 Navigation Panel
Use the menu in the navigation panel to configure NBG4604 features in AP Mode.
The following screen and table show the features you can configure in AP Mode.
Figure 27 Menu: AP Mode
The following table describes the sub-menus.
Rate For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
Summary
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN Station Status Use this screen to view the wireless stations that are currently associated
to the NBG4604.
Table 19 Status Screen (AP Mode) (continued)
LABEL DESCRIPTION
Table 20 Menu: AP Mode
LINK TAB FUNCTION
Status This screen shows the NBG4604’s general device,
system and interface status information. Use this screen
to access the wizard, and summary statistics tables.
Network