Chapter 5 AP Mode
NBG4604 User’s Guide
59
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG4604 to
block access to devices or block the devices from
accessing the NBG4604.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN
is enabled.
WDS Use this screen to set up Wireless Distribution System
(WDS) on your NBG4604.
LAN IP Use this screen to configure LAN IP address and subnet
mask or to get the LAN IP address from a DHCP server.
Management
ACS General Use this screen configure ACS.
Certificate Use this screen to upload security certificates to the
device.
Maintenance
System General Use this screen to view and change administrative
settings such as system and domain names, password
and inactivity timer.
Time Setting Use this screen to change your NBG4604’s time and
date.
Logs View Log Use this screen to view the logs for the categories that
you selected.
Log Settings Use this screen to activate syslog logging as well as the
syslog server IP address.
Tools Firmware Use this screen to upload firmware to your NBG4604.
Configuration Use this screen to backup and restore the configuration
or reset the factory defaults to your NBG4604.
Restart This screen allows you to reboot the NBG4604 without
turning the power off.
Sys OP
Mode
General This screen allows you to select whether your device
acts as a Router or a Access Point.
Language This screen allows you to select the language you prefer.
Table 20 Menu: AP Mode
LINK TAB FUNCTION
To Next Page
Loading...
