ZyXEL Communications NBG4604 - Overview; Setting Your NBG4604 to AP Mode; AP Mode; Chapter 5 AP Mode

NBG4604 User’s Guide
55
CHAPTER 5
AP Mode
5.1 Overview
This chapter discusses how to configure settings while your NBG4604 is set to AP
Mode. Many screens that are available in Router Mode are not available in AP
Mode.
Note: See Chapter 6 on page 63 for an example of setting up a wireless network in
AP mode.
Use your NBG4604 as an AP if you already have a router or gateway on your
network. In this mode your device bridges a wired network (LAN) and wireless
LAN (WLAN) in the same subnet. See the figure below for an example.
Figure 24 Wireless Internet Access in AP Mode
5.2 Setting your NBG4604 to AP Mode
1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for
instructions on how to do this.