Chapter 1 Introduction
NBG4604 User’s Guide
23
WLAN Green On The NBG4604 is ready, but is not sending/
receiving data through the wireless LAN.
Blinking The NBG4604 is sending/receiving data through
the wireless LAN.
The NBG4604 is negotiating a WPS connection
with a wireless client.
Off The wireless LAN is not ready or has failed.
WPS Green On The NBG4604 is ready, but is not sending/
receiving data through the WPS connection.
Blinking The NBG4604 is sending/receiving data through
the WPS connection.
Off The WPS connection is not ready or has failed.
WAN Green On The NBG4604 has a successful 10/100/1000 MB
WAN connection.
Blinking The NBG4604 is sending/receiving data through
the WAN.
Off The WAN connection is not ready, or has failed.
LAN 1-4 Green On The NBG4604 has a successful 10/100/1000 MB
Ethernet connection.
Blinking The NBG4604 is sending/receiving data through
the LAN.
Off The LAN is not connected.
WPS Button Press this button for 1 second to set up a wireless connection via WiFi
Protected Setup with another WPS-enabled client. You must press the
WPS button on the client side within 120 seconds for a successful
connection.
Table 1 Front Panel LEDs and WPS Button
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
