ZyXEL Communications NR2301 - Configuring MAC Filter Mode; Configuring a MAC Blacklist Rule

Chapter 3 Tutorials
NR2301 User’s Guide
32
4 Within 2 minutes, enable WPS on the WiFi device.
The NR2301 authenticates the WiFi device using the PIN, and then sends the WiFi network settings to the
device using WPS. This process may take up to 2 minutes. The WiFi device is then able to connect to the
WiFi network securely.
3.3 MAC Filter
This section shows you how to configure a MAC filter blacklist rule.
3.3.1 Configuring a Blacklist
You can configure a blacklist on the NR2301 to block specified devices from accessing the NR2301.
1 Log into NR2301’s Web Configurator, and then go to the USER LIST > MAC Filter Mode screen.
2 Select Black List from the MAC Filter Mode field and then click Apply.
A
B
C
D