Chapter 9 Device Management
NR2301 User’s Guide
72
9.3.1 IP Filter
Use the IP Filter screen to block clients from accessing specific Internet services.
To access this screen, click APP MODULE > Firewall.
Figure 40 APP MODULE > Firewall > IP Filter
The following table describes the labels in this screen.
Table 30 APP MODULE > Firewall > IP Filter
LABEL DESCRIPTION
Turn the switch button on to enable IP filter on the NR2301. This blocks clients from accessing specific Internet
services listed below.
ID This is the index number of the entry.
IP Enter the IP address of the Internet service which you do not want the NR2301’s clients to
access. You can configure up to 10 entries.
XClick the X next to an entry to clear it.
Apply Click Apply to save your changes back to the NR2301.
Return Click this button to return to the APP MODULE list.
To Next Page
Loading...
