Chapter 9 Device Management
NR2301 User’s Guide
86
Figure 52 APP MODULE > Messages: New Messages
The following table describes the labels in this screen.
9.6 PIN Settings
Use the PIN Settings screens to enable PIN code authentication on the NR2301.
To access this screen, click APP MODULE > PIN Settings.
Table 42 APP MODULE > Messages: New Messages
LABEL DESCRIPTION
Recipients Enter the phone number to which to send the message. Press Enter on your keyboard if you want
to add another phone number. You can add up to 5 phone numbers.
Content Enter the message content. You can send up to 160 characters in one message. If the message
exceeds 160 characters, more than one SMS will be sent.
Flash SMS If you want to display the message as a flash message for the receiver, select the checkbox.
Flash SMS is a special type of text message that displays immediately on the mobile phone
screen without the user having to take any action to read it.
Send Click this to send the message.
Save to Drafts Click this to store the message as a draft.
Cancel Click this to cancel the message and return to the Messages screen.
To Next Page
Loading...
