Chapter 6 WI-FI SETTINGS
NR2301 User’s Guide
52
6.3 Guest Wi-Fi
The Guest Wi-Fi screen allows you to enable and configure guest WiFi network settings on the NR2301.
This is an isolated network for guest clients accessing the WiFi network to secure the WiFi keys and
settings of the NR2301. Clients using the guest WiFi network cannot access the NR2301’s Web
Configurator. Up to 10 clients may connect to the guest WiFi network at the same time. The maximum
number of regular and guest clients connecting to the NR2301 is 32.
To access this screen, click WI-FI SETTINGS > Guest Wi-Fi.
Figure 24 WI-FI SETTINGS > Guest Wi-Fi
The following table describes the labels in this screen.
Table 17 WI-FI SETTINGS > Guest Wi-Fi
LABEL DESCRIPTION
Guest Wi-Fi
Switch
Turn the switch button on to activate the guest WiFi network.
Note: When WiFi is disabled on the NR2301, the guest WiFi network cannot be
activated.
Guest Wi-Fi Band Select whether to use 2.4 GHz or 5 GHz for the guest WiFi network.
Guest Wi-Fi SSID The SSID (Service Set IDentity) identifies the Service Set with which a WiFi client is associated.
Enter a descriptive name (up to 32 printable characters found on a typical English language
keyboard) for the guest wireless LAN.
To Next Page
Loading...
