Chapter 9 Device Management
NR2301 User’s Guide
82
9.4 VPN
Use the VPN screen to enable and configure VPN client settings. You can configure up to 10 VPN client
rules but only one rule can be used at a time. A VPN client rule has the NR2301 use VPN to connect
through the Internet to a remote private network and let the NR2301's LAN devices also access the
remote private network. Essentially you install VPN clients on the NR2301 instead of on the LAN devices.
See Section 9.16.8 on page 100 for more information.
To access this screen, click APP MODULE > VPN.
Figure 48 APP MODULE > VPN
The following table describes the labels in this screen.
Table 38 APP MODULE > VPN
LABEL DESCRIPTION
VPN Client Turn the switch button on to enable VPN client on the NR2301.
VPN Name This field displays the client’s login name.
Connect Status This field displays the current connection status.
VPN Name Enter a descriptive name for the VPN connection rule.
Protocol Type Select PPTP, L2TP, or L2TP/IPSEC as the network protocol. See Section 9.16.9 on page 101
and Section 9.16.10 on page 102 for more information.
VPN Server Enter the IP address of the VPN server.
Username Enter the username of the VPN server.
Password Enter the password of the VPN server.
To Next Page
Loading...
