Chapter 5 User List
NR2301 User’s Guide
43
5.4 Forbidden Users
If the MAC Filter Mode is set to Black List in the MAC Filter Mode screen, this screen is displayed by
clicking USER LIST > Forbidden Users. Use this screen to view and add clients that are denied access to
the NR2301.
Figure 20 USER LIST > Forbidden Users
The following table describes the labels in this screen.
Table 13 USER LIST > Forbidden Users
LABEL DESCRIPTION
Device This field displays the name of the client that is not allowed to access the NR2301.
If you want to change the name of the device, click on its name and enter the new name
in the Alias field of the following screen. Click OK to save the change.
MAC Address This field displays the MAC address of the client that is forbidden to access the NR2301.
Access Type This field displays Forbidden since the client is forbidden access to the NR2301.
To Next Page
Loading...
