Chapter 5 User List
NR2301 User’s Guide
44
5.5 Allow Users
If the MAC Filter Mode is set to White List in the MAC Filter Mode screen, this screen is displayed by
clicking USER LIST > Allow Users. Use this screen to view and add clients that are allowed access to the
NR2301.
Figure 21 USER LIST > Allow Users
Switch The switch button is off so that the client is not allowed to connect to the NR2301.
Turn the switch button on to allow the connection of the client to the NR2301. If the
client connects to the NR2301, it will be added to the Online Users screen. If the client is not
connected to the NR2301, it will be added to the Offline Users list.
Add Wi-Fi User Click this to manually add a client to the Forbidden Users list. The following screen is
displayed. Enter the device’s MAC address in the MAC field and name in the Alias field.
Click OK to save the change.
Table 13 USER LIST > Forbidden Users (continued)
LABEL DESCRIPTION
To Next Page
Loading...
