ZyXEL Communications NR2301 - Configuring Remote Access Settings

Chapter 9 Device Management
NR2301 User’s Guide
80
The following table describes the labels in this screen.
9.3.7 Remote
Use the Remote screen to allow or forbid WAN users from pinging or configuring the NR2301.
To access this screen, click APP MODULE > Firewall > Remote.
Figure 46 APP MODULE > Firewall > Remote
The following table describes the labels in this screen.
Table 35 APP MODULE > Firewall > UPnP
LABEL DESCRIPTION
Turn the switch button on to enable UPnP on the NR2301. Be aware that anyone could use a UPnP application
to open the Web Configurator's login screen without entering the NR2301's IP address (although you must still enter
the password to access the Web Configurator).
Apply Click Apply to save your changes back to the NR2301.
Return Click this button to return to the APP MODULE list.
Table 36 APP MODULE > Firewall > Remote
LABEL DESCRIPTION
Ping From WAN Turn the switch button on to allow WAN users to ping the NR2301.
Admin From WAN Turn the switch button on to allow WAN users to access the NR2301’s Web
Configurator.
Apply Click Apply to save your changes back to the NR2301.
Return Click this button to return to the APP MODULE list.