EasyManua.ls Logo

ZyXEL Communications NR2301 - Diagnosing NR2301 Status

ZyXEL Communications NR2301
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9 Device Management
NR2301 User’s Guide
92
NR2301. Wait a few minutes until the login screen appears. If the login screen does not appear, type the
IP address of the NR2301 in your Web browser.
To access this screen, click APP MODULE > Device Reboot.
Figure 58 APP MODULE > Device Reboot
The following table describes the labels in this screen.
9.11 Diagnosis
Use the Diagnosis screen to check the WiFi and status of the NR2301. Click the Start button to begin
diagnosing. You can check the results displayed in the screen and make changes in the NR2301’s
settings accordingly. Click Rediagnosis to diagnose the NR2301 again or Return to return to the APP
MODULE list.
Table 46 APP MODULE > Device Reboot
LABEL DESCRIPTION
Switch Turn the switch button on to configure and enable a schedule to reboot the NR2301.
Restart time Set the time that you plan to reboot the NR2301.
Repeat Select the day of a week to enable the NR2301 to reboot periodically. Select No Repeat to
reboot the NR2301 just once.
Apply Click Apply to save your changes back to the NR2301.
Restart Click this button to reboot the NR2301.
Return Click this button to return to the APP MODULE list.

Table of Contents

Related product manuals