NR2301 User’s Guide
109
CHAPTER 10
Troubleshooting
10.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
• Power
• NR2301 Access and Login
• Internet Access
• IP Address Setup
10.2 Power
The NR2301 does not turn on. The LCD display is not on.
1 Make sure the built-in battery is charged. Press the power button to turn the NR2301 on. See (Chapter 1
on page 11.)
2 If the problem continues, contact the vendor.
10.3 NR2301 Access and Login
I forgot the IP address for the NR2301.
1 The default IP address is 192.168.1.1.
2 If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults.
To reset your NR2301 press the RESET button for 3 seconds.
I cannot see or access the Login screen in the Web Configurator.
To Next Page
Loading...
