Chapter 12 AP Profile
NWA50AX User’s Guide
113
Fig ure 68 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wpa3 (NWA50AX)
The following table describes the labels in this screen.
Cipher Type Select an encryption cipher type from the list.
• a uto - This automatically chooses the best available cipher based on the cipher in
use by the wireless client that is attempting to make a connection.
• a e s - This is the Advanced Encryption Standard encryption method. It is a more
recent development over TKIP and considerably more robust. Not all wireless clients
may support this.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Group Key Update
Timer
Enter the interval (in seconds) at which the AP updates the group WPA2 encryption key.
Pre-Authentication Select Ena b le to allow pre-authentication. Otherwise, select Disa b le .
OK Click O K to save your changes back to the Zyxel Device.
Cancel Click C a nc e l to exit this screen without saving your changes.
Table 47 Configuration > Object > AP Profile > SSID > Security List > AAdd/Edit Security Profile> Security
Mode: wpa3
LABEL DESC RIPTIO N
General Settings
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Table 46 Configuration > Object > AP Profile > SSID > Security List > AAdd/Edit Security Profile> Security
Mode: wpa2-mix (continued)
LABEL DESC RIPTIO N
To Next Page
Loading...
