Chapter 13 MON Profile
NWA50AX User’s Guide
119
The following table describes the labels in this screen.
Table 51 Configuration > Object > MON Profile > Add/Edit MON Profile
LABEL DESCRIPTION
Activate Select this to activate this monitor mode profile.
Profile Name This field indicates the name assigned to the monitor mode profile.
Channel dwell time Enter the interval (in milliseconds) before the Zyxel Device switches to another channel for
monitoring.
Scan Channel Mode Select a uto to have the Zyxel Device switch to the next sequential channel once the
Cha nne l dwe ll time expires.
Select m a nua l to set specific channels through which to cycle sequentially when the
Cha nne l dwe ll time expires. Selecting this options makes the Sc a n C ha nne l List options
available.
Set Scan Channel List
(2.4 GHz)
Select one or more than one channel to have the Zyxel Device using this profile scan the
channel(s) when Sc a n C ha nne l Mo d e is set to ma nua l.
These channels are limited to the 2.4 GHz range (802.11 b/g/n/ax).
Set Scan Channel List
(5 GHz)
Select one or more than one channel to have the Zyxel Device using this profile scan the
channel(s) when Sc a n C ha nne l Mo d e is set to ma nua l.
These channels are limited to the 5 GHz range (802.11 a/n/ac/ax). Not all Zyxel Devices
support both 2.4 GHz and 5 GHz frequency bands.
OK Click O K to save your changes back to the Zyxel Device.
Cancel Click C a nc e l to exit this screen without saving your changes.
To Next Page
Loading...
