Chapter 17 Log and Report
NWA50AX User’s Guide
158
Fig ure 98 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
Table 67 Configuration > Log & Report > Log Setting
LABEL DESCRIPTIO N
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Activate To turn on an entry, select it and click Ac tiva te .
Inactivate To turn off an entry, select it and click Ina c tiva te .
# This field is a sequential value, and it is not associated with a specific log.
Status This field shows whether the log is active or not.
Name This field displays the name of the log (system log or one of the remote servers).
Log Format This field displays the format of the log.
Inte rna l - system log; you can view the log on the Vie w Lo g tab.
VRPT/ Syslog - Zyxel’s Vantage Report, syslog-compatible format.
C EF/ Syslo g - Common Event Format, syslog-compatible format.
Summary This field is a summary of the settings for each log.
To Next Page
Loading...
