Chapter 17 Log and Report
NWA50AX User’s Guide
161
The following table describes the labels in this screen.
Table 68 Configuration > Log & Report > Log Setting > Edit System Log Setting
LABEL DESCRIPTIO N
E-Mail Server 1/2
Active Select this to send log messages and alerts according to the information in this section.
You specify what kinds of log messages are included in log information and what kinds of
log messages are included in alerts in the Ac tive Lo g a nd Ale rt section.
Mail Server Type the name or IP address of the outgoing SMTP server.
SSL/TLS Encryption Select SSL/ TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you
want encrypted communications between the mail server and the Zyxel Device.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
Select No to not encrypt the communications.
Mail Server Port Enter the same port number here as is on the mail server for mail traffic.
Mail Subject Type the subject line for the outgoing e-mail. Select App e nd syste m na me to add the
Zyxel Device’s system name to the subject. Select Ap pe nd da te time to add the Zyxel
Device’s system date and time to the subject.
Send From Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Send Log To Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To Type the e-mail address to which alerts are delivered.
Sending Log Select how often log information is e-mailed. Choices are: Whe n Full, Ho urly a nd Whe n
Full, Da ily a nd Whe n Full, and We e kly a nd Whe n Full.
Day for Sending Log This field is available if the log is e-mailed weekly. Select the day of the week the log is e-
mailed.
Time for Sending
Log
This field is available if the log is e-mailed weekly or daily. Select the time of day (hours
and minutes) when the log is e-mailed. Use 24-hour notation.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name This box is effective when you select the SMTP Authe ntic a tion check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password This box is effective when you select the SMTP Authe ntic a tion check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Active Log and Alert
System log Use the Syste m Lo g drop-down list to change the log settings for all of the log categories.
disa ble a ll log s (red X) - do not log any information for any category for the system log or
e-mail any logs to e-mail server 1 or 2.
e na b le no rma l log s (green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the
Zyxel Device will e-mail logs to them.
e na b le no rma l log s a nd de bug lo g s (yellow check mark) - create log messages, alerts,
and debugging information for all categories. The Zyxel Device does not e-mail
debugging information, even if this setting is selected.
To Next Page
Loading...
