Chapter 18 File Manager
NWA50AX User’s Guide
169
Once your Zyxel Device is configured and functioning properly, it is highly recommended that you back
up your configuration file before making further configuration changes. The backup configuration file
will be useful in case you need to return to your previous settings.
C o nfig ura tio n File Flo w a t Re sta rt
• If there is not a sta rtup- c o nfig .c o nf when you restart the Zyxel Device (whether through a
management interface or by physically turning the power off and back on), the Zyxel Device uses the
syste m - d e fa ult.c o nf configuration file with the Zyxel Device’s default settings.
•If there is a sta rtup- c o nfig .c o nf, the Zyxel Device checks it for errors and applies it. If there are no
errors, the Zyxel Device uses it and copies it to the la stg o o d.c o nf configuration file as a back up file. If
there is an error, the Zyxel Device generates a log and copies the sta rtup- c o nfig .c o nf configuration
file to the sta rtup- c o nfig - b a d.c o nf configuration file and tries the existing la stg o od.c o nf configuration
file. If there isn’t a la stg o o d.c o nf configuration file or it also has an error, the Zyxel Device applies the
syste m - d e fa ult.c o nf configuration file.
• You can change the way the sta rtup- c o nfig .c o nf file is applied. Include the setenv-startup stop-
on-error off command. The Zyxel Device ignores any errors in the sta rtup - c o nfig .c o nf file and
applies all of the valid commands. The Zyxel Device still generates a log for any errors.
Fig ure 103 Maintenance > File Manager > Configuration File
Do no t turn o ff the Zyxe l De vic e while c o nfig ura tion file uplo a d is in
pro g re ss.
To Next Page
Loading...
