Appendix B IPv6
NWA50AX User’s Guide
236
1 Install Dibbler and select the DHCPv6 client option on your computer.
2 After the installation is complete, select Start > All Pro g ra m s > Dib b le r- DHC Pv6 > C lie nt Insta ll a s se rvic e .
3 Select Sta rt > Co ntro l Pa ne l > Adm inistra tive To o ls > Se rvic e s.
4 Double click Dibb le r - a DHCPv6 c lie nt.
5 Click Sta rt and then O K.
6 Now your computer can obtain an IPv6 address from a DHCPv6 server.
Exa m ple - Ena b ling IPv6 o n Windo ws 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7
computer.
To enable IPv6 in Windows 7:
To Next Page
Loading...
