Chapter 6 Dashboard
NWA50AX User’s Guide
46
Boot Status This field displays details about the Zyxel Device’s startup state.
O K - The Zyxel Device started up successfully.
Firmwa re upda te O K - A firmware update was successful.
Pro b le m a tic c o nfig ura tion a fte r firmwa re upda te - The application of the configuration
failed after a firmware upgrade.
Syste m de fa ult c o nfig uratio n - The Zyxel Device successfully applied the system default
configuration. This occurs when the Zyxel Device starts for the first time or you intentionally
reset the Zyxel Device to the system default settings.
Fa llba c k to la stg o o d c o nfig uratio n - The Zyxel Device was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fa llba c k to syste m de fa ult c o nfig ura tio n - The Zyxel Device was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Bo o ting in p ro g re ss - The Zyxel Device is still applying the system configuration.
Management
Mode
This shows whether the Zyxel Device is set to work as a stand alone AP.
Interface Status
Summary
If an Ethernet interface does not have any physical ports associated with it, its entry is
displayed in light gray text. Click the De ta il icon to go to a (more detailed) summary screen
of interface statistics.
Name This field displays the name of each interface.
Status This field displays the current status of each interface. The possible values depend on what
type of interface it is.
Ina c tive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Spe e d / Duple x - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).
VID This field displays the VLAN ID to which the interface belongs.
IP Addr/Netmask This field displays the current IP address and subnet mask assigned to the interface. If the IP
address is 0.0.0.0, the interface is disabled or did not receive an IP address and subnet mask
via DHCP.
IP Assignment This field displays how the interface gets its IP address.
Sta tic - This interface has a static IP address.
DHCP C lie nt - This interface gets its IP address from a DHCP server.
Action If the interface has a static IP address, this shows n/ a .
If the interface has a dynamic IP address, use this field to get or to update the IP address for
the interface. Click Re ne w to send a new DHCP request to a DHCP server.
WLAN Interface
Status Summary
This displays status information for the WLAN interface.
Status This displays whether or not the WLAN interface is activated.
MAC Address This displays the MAC address of the radio.
Radio This indicates the radio number on the Zyxel Device.
Band This indicates the wireless frequency band currently being used by the radio.
This shows - when the radio is in monitor mode.
OP Mode This indicates the radio’s operating mode. Operating modes are AP (MBSSID), MO N
(monitor), Roo t A P or Re pe a te r.
Table 14 Dashboard (continued)
LABEL DESCRIPTIO N
To Next Page
Loading...
