Appendix A Log Descriptions
NXC Series User’s Guide
442
Verify server's
certificate has
failed.
The device could not process an HTTPS connection because it could not verify the
server's certificate.
Get server response
has failed.
The device sent packets to the server, but did not receive a response. The root
cause may be that the connection is abnormal.
Expiration daily-
check has failed:%s.
The daily check for service expiration failed, an error message returned by the
myZyxel.com server will be appended to this log.
%s: error message returned by myZyxel.com server
Do expiration daily-
check has failed.
Because of lack must
fields.
The device received an incomplete response to the daily service expiration check
and the packets caused a parsing error for the device.
Server setting error.
The device could not retrieve the server's IP address or FQDN from local.
Do expiration daily-
check has failed.
The daily check for service expiration failed.
Do expiration daily-
check has succeeded.
The daily check for service expiration was successful.
System bootup. Do
expiration daily-
check.
The device processes a service expiration day check immediately after it starts up.
After register. Do
expiration daily-
check immediately.
The device processes a service expiration day check immediately after device
registration.
Time is up. Do
expiration daily-
check.
The processes a service expiration day check every 24 hrs.
Read MyZyxel.com
storage has failed.
Read data from EEPROM has failed.
Open /proc/MRD has
failed.
This error message is shown when getting MAC address.
Unknown TLS/SSL
version: %d.
The device only supports SSLv3 protocol. %d: SSL version assigned by client.
Load trusted root
certificates has
failed.
The device needs to load the trusted root certificate before the device can verify
a server's certificate. This log displays if the device failed to load it.
Certificate has
expired.
Verification of a server’s certificate failed because it has expired.
Self signed
certificate.
Verification of a server’s certificate failed because it is self-signed.
Self signed
certificate in
certificate chain.
Verification of a server’s certificate failed because there is a self-signed certificate
in the server’s certificate chain.
Verify peer
certificates has
succeeded.
The device verified a server’s certificate while processing an HTTPS connection.
Table 210 Registration Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
