Appendix A Log Descriptions
NXC Series User’s Guide
443
Certification
verification failed:
Depth: %d, Error
Number(%d):%s.
Verification of a server’s certificate failed while processing an HTTPS connection.
This log identifies the reason for the failure.
1st %d: certificate chain level
2nd %d: error number
%s: error message
Certificate issuer
name:%s.
Verification of the specified certificate failed because the device could not get
the certificate’s issuer name. %s is the certificate name.
The wrong format for
HTTP header.
The header format of a packet returned by a server is wrong.
Timeout for get server
response.
After the device sent packets to a server, the device did not receive any response
from the server. The root cause may be a network delay issue.
Download file size is
wrong.
The file size downloaded for AS is not identical with content-length
Parse HTTP header has
failed.
Device can't parse the HTTP header in a response returned by a server. Maybe
some HTTP headers are missing.
Table 211 Sessions Limit Logs
LOG MESSAGE DESCRIPTION
Maximum sessions per
host (%d) was
exceeded.
%d is maximum sessions per host.
Table 212 Policy Route Logs
LOG MESSAGE DESCRIPTION
Can't open bwm_entries
Policy routing can't activate BWM feature.
Can't open link_down
Policy routing can't detect link up/down status.
Cannot get handle from
UAM, user-aware PR is
disabled
User-aware policy routing is disabled due to some reason.
mblock: allocate
memory failed!
Allocating policy routing rule fails: insufficient memory.
pt: allocate memory
failed!
Allocating policy routing rule fails: insufficient memory.
To send message to
policy route daemon
failed!
Failed to send control message to policy routing manager.
The policy route %d
allocates memory fail!
Allocating policy routing rule fails: insufficient memory.
%d: the policy route rule number
The policy route %d
uses empty user group!
Use an empty object group.
%d: the policy route rule number
Table 210 Registration Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
