ZyXEL Communications P-662HW-D - Figure 63 Wireless: no Security; Table 37 Wireless no Security; WEP Encryption Screen

Chapter 7 Wireless LAN
P-662H/HW-D Series User’s Guide
119
Figure 63 Wireless: No Security
The following table describes the labels in this screen.
7.5.2 WEP Encryption Screen
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Table 37 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.