ZyXEL Communications P-662HW-D - Changing Login Password; Figure 17 System General; Table 8 System General: Password

Chapter 2 Introducing the Web Configurator
P-662H/HW-D Series User’s Guide
57
2.4.8 Changing Login Password
It is highly recommended that you periodically change the password for accessing the ZyXEL
Device. If you didn’t change the default one after you logged in or you want to change to a
new password again, then click Maintenance > System to display the screen as shown next.
Figure 17 System General
The following table describes the fields in this screen.
Rx B/s This field displays the number of bytes received in the last second.
Up Time This field displays the elapsed time this port has been up.
Collisions This is the number of collisions on this port.
Poll Interval(s) Type the time interval for the browser to refresh system statistics.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Stop Click this button to halt the refreshing of the system statistics.
Table 7 Status: Packet Statistics (continued)
LABEL DESCRIPTION
Table 8 System General: Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password Type the new password in this field.
Retype to Confirm Type the new password again in this field.