P-662H/HW-D Series User’s Guide
195
CHAPTER 13
Content Access Control
This chapter gives some background information on Content Access Control and explains how
to get started with the ZyXEL Device Content Access Control.
13.1 Content Access Control Overview
Content Access Control (CAC) lets a LAN administrator control a LAN user’s Internet access
privileges by blocking services that you specify. The administrator can create user groups with
access restrictions and set up user accounts (with a login name and password) for each person
(user) on the network. The user accounts are associated to a user group. Each person must log
into the system before they can gain access to the Internet.
13.1.1 Content Access Control WLAN Application
You can control LAN user Internet access by having an administrator configure Content
Access Control on the ZyXEL Device.
The administrator must create user groups and accounts (each person (user) on the network).
Each person must log into the system before they can gain access to the Internet. Each user
group will hold the details (access rights and privileges and time schedule) for the associated
user accounts. The ZyXEL Device enforces these access restrictions.
Figure 111 Content Access Control with WLAN Application
13.1.2 Configuration Steps
To activate and set up Content Access Control on the ZyXEL Device, you must do the
following tasks.
1 Create four user groups with access restrictions and schedule.
2 Create user accounts and associate the user accounts to a user group.
To Next Page
Loading...
