Chapter 7 Wireless LAN
P-662H/HW-D Series User’s Guide
122
7.5.4  WPA(2) Authentication Screen
In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under 
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.
Figure 66   Wireless: WPA(2)
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced Setup Click Advanced Setup to display the Wireless Advanced Setup screen and edit 
more details of your WLAN setup.
Table 39   Wireless: WPA(2)-PSK
LABEL DESCRIPTION