ZyXEL Communications P-662HW-D - Configuring Time Schedule; Figure 113 Control Access Control: General: Time Scheduling

Chapter 13 Content Access Control
P-662H/HW-D Series User’s Guide
197
13.2.1 Configuring Time Schedule
Use this screen to set up the time schedule for each user group. Click Edit under Time in the
Content Access Control-General screen. A screen displays as shown next.
Figure 113 Control Access Control: General: Time Scheduling
Service Click Edit to select the services you wish to block access for a user group.
Web
Browsing
Click Edit to specify the web site category(ies) and/or key words in a web site
address you wish to block access for a user group.
Click the Diagnostic icon ( ) to test the access privilege on a specified web site
address.
Content
Filtering
Service
Click Register to go to a web site where you can register for category-based content
filtering (using an external database). You can use a trial application or register your
iCard’s PIN. Refer to the web site’s on-line help for details.
Note: The website displays a registration successful web page. It may
take up to another ten minutes for content filtering to be
activated.
Click Activate to begin the content filtering service now.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to return to the previously saved settings.
Table 74 Content Access Control: General (continued)
LABEL DESCRIPTION