ZyXEL Communications P-662HW-D - Figure 189 System Time Setting; Time Setting

Chapter 23 System
P-662H/HW-D Series User’s Guide
319
23.2 Time Setting
Use this screen to change your ZyXEL Device’s time and date settings. Click Maintenance >
System > Time Setting. The screen appears as shown.
Figure 189 System Time Setting
Old Password Type the default administrator password (1234) or the existing password you use to
access the system for configuring advanced features in this field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 132 System General Setup
LABEL DESCRIPTION