ZyXEL Communications P-662HW-D - Figure 280 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK; Figure 281 Windows XP SP2: Wireless Network Connection: no Security; Table 165 Windows XP: Wireless Networks

Appendix E Management with Wireless Zero Configuration
P-662H/HW-D Series User’s Guide
415
Figure 280 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK
Figure 281 Windows XP SP2: Wireless Network Connection: No Security
5 Verify that you have successfully connected to the selected network and check the
connection status in the wireless network list or the connection icon in the Preferred
networks or Available networks list.
The following table describes the connection icons.
Security Settings
When you configure the ZyXEL Device to connect to a secure network but the security
settings are not yet enabled on the ZyXEL Device, you will see different screens according to
the authentication and encryption methods used by the selected network.
Association
Select a network in the Preferred networks list and click Properties to view or configure
security.
Table 165 Windows XP: Wireless Networks
ICON DESCRIPTION
This denotes the wireless network is an available wireless network.
This denotes the ZyXEL Device is associated to the wireless network.
This denotes the wireless network is not available.