ZyXEL Communications P-662HW-D - Figure 38 Wizard: Welcome; Figure 39 Bandwidth Management Wizard: General Information; Table 19 Bandwidth Management Wizard: General Information

Chapter 4 Bandwidth Management Wizard
P-662H/HW-D Series User’s Guide
75
Figure 38 Wizard: Welcome
3 Activate bandwidth management and select to allocate bandwidth to packets based on
the services.
Figure 39 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 Use the second wizard screen to select the services that you want to apply bandwidth
management and select the priorities that you want to apply to the services listed.
Table 19 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN, LAN or WLAN
port.
Select Services Setup to allocate bandwidth based on the service requirements.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.