ZyXEL Communications P-662HW-D - Figure 45 more Connections; More Connections Edit; Table 23 more Connections

Chapter 5 WAN Setup
P-662H/HW-D Series User’s Guide
90
Figure 45 More Connections
The following table describes the labels in this screen.
5.6.1 More Connections Edit
Use this screen to configure additional connections via the WAN interface. Click the edit icon
in the More Connections screen to configure a connection.
Table 23 More Connections
LABEL DESCRIPTION
# This is the index number of a connection.
Active This display whether this connection is activated. Clear the check box to disable
the connection. Select the check box to enable it.
Name This is the descriptive name for this connection.
VPI/VCI This is the VPI and VCI values used for this connection.
Encapsulation This is the method of encapsulation used for this connection.
Modify The first (ISP) connection is read-only in this screen. Use the WAN > Internet
Connection screen to edit it.
Click the edit icon to go to the screen where you can edit the connection.
Click the delete icon to remove an existing connection. You cannot remove the
first connection.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.