Chapter 26 Diagnostic
P-662H/HW-D Series User’s Guide
336
26.2 DSL Line Diagnostic
Use this screen to test your DSL connection. Click Maintenance > Diagnostic > DSL Line to
open the screen shown next.
Figure 203 Diagnostic: DSL Line
The following table describes the fields in this screen.
Table 140 Diagnostic: DSL Line
LABEL DESCRIPTION
ATM Status Click this button to view ATM status.
ATM Loopback
Test
Click this button to start the ATM loopback test. Make sure you have configured at
least one PVC with proper VPIs/VCIs before you begin this test. The ZyXEL Device
sends an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it
back) to the ZyXEL Device. The ATM loopback test is useful for troubleshooting
problems with the DSLAM and ATM network.
DSL Line Status Click this button to view the DSL port’s line operating values and line bit allocation.
Reset ADSL
Line
Click this button to reinitialize the ADSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
Capture All Logs Click this button to display all logs generated with the DSL line.
To Next Page
Loading...
