ZyXEL Communications P-662HW-D - Administrator Login; Figure 121 Content Access Control: User Login Screen; Figure 122 Content Access Control: User Logout Screen

Chapter 13 Content Access Control
P-662H/HW-D Series User’s Guide
210
Figure 121 Content Access Control: User Login Screen
3 After you enter your login name and password the ZyXEL Device checks the access
profile and begins enforcing the access control restriction as defined by the
administrator.
4 The access privileges remain in force until you log out.
5 After a successful login, the system launches a small pop-up window that displays the
remaining budget time and a logout button.
Figure 122 Content Access Control: User Logout Screen
There are four ways to be logged out of the system.
• Click the Logout button in the user logout screen.
• The idle timeout triggers the logout (the default is ten minutes).
• The access time allowance budget reaches zero and triggers the logout.
• The system clock reaches the end time for the user’s account and triggers the logout.
13.7.2 Administrator Login
The administrator can log into the system.
• The administrator opens their browser and is directed to the ZyXEL Device user login
page (this is the same as the user login).
• The administrator enters “1234” as the username and the system password.
• The system administrator main menu screen opens.