Chapter 5 WAN Setup
P-662H/HW-D Series User’s Guide
99
5.10 Dial Backup Modem Setup
Use this screen to configure the advanced modem settings. Click Edit in the WA N > WAN
Backup Setup > Advanced Setup to view the screen as shown.
Figure 52 WAN Dial Backup Modem Setup
Budget The configuration in the Budget fields has priority over your Connection settings.
Allocated Budget Type the amount of time (in minutes) that the dial backup connection can be used
during the time configured in the Period field. Set an amount that is less than the
time period configured in the Period field. If you set the Allocated Budget to 0, you
will not be able to use the dial backup connection.
Period Type the time period (in hours) for how often the budget should be reset. For
example, to allow calls to this remote node for a maximum of 10 minutes every
hour, set the Allocated Budget to 10 (minutes) and the Period to 1 (hour). If you set
the Period to 0, there is no budget control and the ZyXEL Device uses the
Connection settings.
Back
Click Back to return to the previous screen.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 27 WAN Backup Advanced Setup
LABEL DESCRIPTION