P-662H/HW-D Series User’s Guide
291
CHAPTER 21
Remote Management
Configuration
This chapter provides information on configuring remote management.
21.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
" When you configure remote management to allow management from the
WAN, you still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN)
• All (LAN & WAN & DMZ)
•DMZ only,
• LAN only,
• None (Disable).
" When you choose WAN only or LAN & WAN & DMZ, you still need to
configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Access
Status field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
To Next Page
Loading...
