EasyManua.ls Logo

ZyXEL Communications P-662HW-D - Figure 238 Macintosh os X: Network

ZyXEL Communications P-662HW-D
492 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Setting up Your Computer’s IP Address
P-662H/HW-D Series User’s Guide
371
Figure 238 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
Type your IP address in the IP Address box.
Type your subnet mask in the Subnet mask box.
Type the IP address of your ZyXEL Device in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.

Table of Contents

Other manuals for ZyXEL Communications P-662HW-D

Related product manuals