Chapter 9 Network Address Translation (NAT) Screens
P-662H/HW-D Series User’s Guide
154
End Port Type a port number or the ending port number in a range of port numbers.
Trigger Port
Range
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyXEL
Device to record the IP address of the LAN computer that sent the traffic to a server on
the WAN.
Start Port Type a port number or the starting port number in a range of port numbers.
End Port Type a port number or the ending port number in a range of port numbers.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 58 Trigger Port Edit
LABEL DESCRIPTION
To Next Page
Loading...
