ZyXEL Communications P-662HW-D - Page 48

Chapter 2 Introducing the Web Configurator
P-662H/HW-D Series User’s Guide
48
Status This screen shows the ZyXEL Device’s general device, system
and interface status information. Use this screen to access the
summary statistics tables.
Network
Remote Node Use this screen to configure placing calls to a remote gateway.
WAN Internet Access
Setup
This screen allows you to configure ISP parameters, WAN IP
address assignment, DNS servers and other advanced
properties.
More Connections Use this screen to configure additional WAN connections.
WAN Backup
Setup
Use this screen to configure your traffic redirect properties and
WAN backup settings.
LAN IP Use this screen to configure LAN TCP/IP settings, enable Any
IP and other advanced properties.
DHCP Setup Use this screen to configure LAN DHCP settings.
Client List
Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host
name).
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless LAN
(Wireless
devices only)
General Use this screen to configure the wireless LAN settings and
WLAN authentication/security settings.
OTIST This screen allows you to assign wireless clients the ZyXEL
Device’s wireless security settings.
MAC Filter Use this screen to configure the ZyXEL Device to block access
to devices or block the devices from accessing the ZyXEL
Device.
QoS WMM QoS allows you to prioritize wireless traffic according to
the delivery requirements of the individual and applications.
DMZ DMZ
Use this screen to create and enable a DMZ port.
NAT General Use this screen to enable NAT.
Port Forwarding Use this screen to configure servers behind the ZyXEL Device.
Address Mapping
Use this screen to configure IP address ranges for servers
behind the ZyXEL Device.
Trigger Port
Use this screen to configure port triggering on the ZyXEL
Device.
Security
Firewall General Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rules This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Table 2 Web Configurator Screens Summary (continued)
LINK/ICON SUB-LINK FUNCTION