Chapter 7 Wireless LAN
P-870HN-5xb User’s Guide
121
7.4.1 No Security
Select No Security to allow wireless devices to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your Device, your network is
accessible to any wireless networking device that is within range.
Figure 53 Wireless LAN > General: No Security
The following table describes the labels in this screen.
Apply Click this to save your changes back to the Device.
Reset Click this to reload the previous configuration for this screen.
Table 26 Network > Wireless LAN > General
LABEL DESCRIPTION
Table 27 Wireless LAN > General: No Security
LABEL DESCRIPTION
Security
Mode
Choose No Security from the drop-down list box.
To Next Page
Loading...
