ZyXEL Communications P-870HN-5xb - Route Info

Chapter 4 Status Screens
P-870HN-5xb User’s Guide
64
4.1.2 Route Info
Routing is based on the destination address only and the Device takes the shortest
path to forward a packet. Click Status > Route Info to access this screen. Use
this screen to view the internal routing table on the Device.
Figure 22 Status > Route Info
The following table describes the labels in this screen.
Pkts This indicates the number of transmitted packets on this interface.
Errs This indicates the number of frames with errors received on this
interface.
Drops This indicates the number of received packets dropped on this interface.
Transmitted
Bytes This indicates the number of bytes transmitted on this interface.
Pkts This indicates the number of transmitted packets on this interface.
Errs This indicates the number of frames with errors transmitted on this
interface.
Drops This indicates the number of outgoing packets dropped on this interface.
Refresh
Interval
Enter the time interval for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the
Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Table 5 Status > WAN Service Statistics (continued)
LABEL DESCRIPTION
Table 6 Status > Route Info
LABEL DESCRIPTION
Destination This indicates the destination IP address of this route.
Gateway This indicates the IP address of the gateway that helps forward this route’s
traffic.
Subnet
Mask
This indicates the destination subnet mask of this route.