Chapter 14 DNS Route
P-870HN-5xb User’s Guide
190
The following table describes the labels in this screen.
14.2.1 DNS Route Setup
Click the Add button in the DNS Route screen. Use this screen to configure the
required information for a DNS policy route.
Figure 99 DNS Route: Add
The following table describes the labels in this screen.
Table 64 Advanced > DNS Route
LABEL DESCRIPTION
Domain Name This is the domain name to which the DNS policy route applies.
Subnet Mask This is the subnet mask of the domain name.
WAN Interface This is the WAN interface through which the Device sends DNS queries
that match this DNS policy route.
Add Click this to create a new rule.
Remove Click the icon to remove a rule from the Device. A window displays asking
you to confirm that you want to delete the rule.
Table 65 DNS Route: Add
LABEL DESCRIPTION
Domain Name Enter the domain name to which the DNS policy route applies.
Subnet Mask Enter the subnet mask of the domain name.
Use Interface Select a WAN interface through which the traffic is sent. You must have
the WAN interface(s) already configured in the WAN screens.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the Device.
To Next Page
Loading...
